Precision Cleaning of Medical Components

Anke Sandra Meunier

When aqueous cleaning processes reach their limits, the ideal solution is a hybrid process using solvents, co-solvents and, where necessary, aqueous pre-cleaning. This article presents two versions of this procedure on the basis of examples from the medical technology industry. PDF-Download

The Launch of a New Special Effect Powder Technology

IGP Pulvertechnik AG

A new special effect powder technology allows the bonding rate of special effect pigments to be increased significantly. This leads to more homogeneous coatings and a more cost-effective process when compared with the bonding and dry blend procedures, in particular in the case of powder coatings with a high pigment content. PDF-Download

Playing it Safe

Udo Steinhauser

The unplanned shutdown of a cleaning machine caused by the need for reactive maintenance or by a fault often leads to additional costs or, in the worst case, to the subsequent production processes being stopped. Therefore, it is important for cleaning machines to operate according to plan. An individual cleaning strategy can play an important role in ensuring that this occurs. PDF-Download

Powder Coating Protects Against Mosquitoes

Adapta Color S.L.

The range of applications for powder coatings can be extended by integrating new properties. A completely new approach is powder coatings that have an insect-repellent effect. PDF-Download

Paint Stripping and Cleaning in a Compact Oven

Wiwox GmbH Surface Systems

A new range of compact ovens is available for removing paint by means of pyrolysis. The ovens can be used to clean even sensitive components because they remain at precisely the specified temperature. PDF-Download

Fully Automatic Machining, Cleaning and Measuring

Roland Schmidt

The highest possible standards of dimensional accuracy are an essential feature of the process of manufacturing mould parts for injection moulding tools. In order to meet these standards, the mould halves produced by a manufacturer of control and drive systems undergo a tactile measurement process after automated HSC milling and die sinking. They must not only be clean and dry but also at a pre-defined temperature. This is made possible by a fully automatic cleaning system that is integrated into the mould production line. PDF-Download

Quality Improvements Combined with Greater Efficiency

Binks DeVilbiss Ransburg

The key criteria for painting high-quality wood products include a rapid process, a high level of application efficiency and an excellent surface finish. A specially designed, compact paint spraying system allows all these requirements to be met. PDF-Download

High corrosion resistance for aluminum components

Chemetall GmbH

In its modern, multi-function production plant, TK Beschichtungstechnik can apply both conventional phosphating processes as well as a thin-film technology based on silanes. This flexibility in production capabilities provides positive benefits in terms of sustainability, quality and cost effectiveness. PDF-Download

Blasting, Straightening and Priming Steel Sheets and Profiles for Cruise Liners

Doris Schulz

A service provider to a shipyard in northern Germany has invested in a new, fully automatic corrosion protection line with an innovative painting system. The new line enables steel sheets and bulb flats for the shipbuilding industry to be blasted, straightened and primed using a particularly environmentally friendly process. PDF-Download

Process-oriented approach to assuring cleanliness of parts

André Lohse

The degree of parts’ cleanliness that is possible and sufficient is determined by the process chain “Preproduction — Cleaning — Post-processing”. To define and comply with the requirements it is necessary to identify and monitor the quality-relevant variables. PDF-Download

Ultra-High Quality Cleaning — Just in Time

Mafac Ernst Schwarz GmbH & Co. KG Maschinenfabrik

A contract manufacturer for automotive suppliers has to provide reliable, daily, just-in-time deliveries of a number of batches of clean components. The delivery cycle is determined by the cleaning process, which functions as a quality assurance measure, and by the time factor. For the final cleaning of its components, the company uses a machine that offers a variety of options and, therefore, a high level of flexibility. PDF-Download

Faster and More Energy Efficient

Karl Bubenhofer AG

At its Bruchsal site, Voigt & Schweitzer, a company that specialises in hot-dip galvanising recently began using a low temperature powder coating on its galvanised substrates. The result is a more cost-effective and flexible powder coating process. PDF-Download

A More Efficient Production Process

Brillux Industrial Coatings

Cast iron gearbox parts produced by a manufacturer of special gearboxes are given a coat of paint to improve their corrosion resistance and protect their surface. A fast-drying, single-component, water-based paint is used to ensure that the gearboxes can be delivered on time and to prevent bottlenecks in the production process. PDF-Download

Fewer Layers, Faster Curing

Dr. Frank Rothbarth

Polyaspartic coatings cure very quickly and fewer layers of paint are often required. The development of a new hardener has increased the possibilities for using polyaspartic coatings on floors. PDF-Download

Two-Component Hybrid Coating for Roofs

Wiwa Wilhelm Wagner GmbH & Co.KG

In order to ensure a long life for the roof of his residential and business premises, a building owner chose to coat it with a two-component polyurethane and polyurea hybrid material. High-performance mixing and dosing machines were used to process and apply the coating. PDF-Download

Robust Surfaces for Kitchen Slicers

Christian Krüger

The kitchen slicers manufactured by Ritterwerk have to meet a wide range of requirements. These include having an attractive design and also specific mechanical properties in order to comply with food processing legislation. All of this has been made possible by a special powder coating and a water-based, two-component polyurethane paint. PDF-Download

News

PDF-Download

Identifying and Resolving Faults Quickly

Dürr Systems GmbH

Painting lines should be easy to operate and any faults that occur need to be detected and rectified rapidly. In order to ensure that these requirements are met, a software package that can be used to visualise painting booths has been updated. It enables faults to be displayed accurately and clearly and provides relevant information about troubleshooting. PDF-Download

A Customised Powder Supply

J. Wagner GmbH

A new generation of powder centres can be individually configured, which allows them to be adapted to meet each operator’s specific requirements. PDF-Download

Powder Pump Allows for More Flexibility and Cuts Costs

Gema Switzerland GmbH

A powder primer and a top coat or a single-layer powder coating? Or perhaps a two-sided preliminary coating and a subsequent automatic finish? A specialist coating company in Austria no longer has to worry about these different options, because its two new powder coating lines are flexible enough to process all types of materials and components. PDF-Download